Operating & Maintaining Your Heat Pump

Operating and Maintaining Your Heat Pump

Proper operation of your heat pump will save energy. Do not set back the heat pump's thermostat if it causes the backup heating to come on; backup heating systems are usually more expensive to operate. Continuous indoor fan operation can degrade heat pump performance unless a high-efficiency, variable-speed fan motor is used. Operate the system on the "auto" fan setting on the thermostat.

Like all heating and cooling systems, proper maintenance is key to efficient operation. The difference between the energy consumption of a well-maintained heat pump and a severely neglected one ranges from 10%–25%.

Clean or change filters once a month or as needed, and maintain the system according to manufacturer's instructions. Dirty filters, coils, and fans reduce airflow through the system. Reduced airflow decreases system performance and can damage your system's compressor. Clean outdoor coils whenever they appear dirty; occasionally, turn off power to the fan and clean it; remove vegetation and clutter from around the outdoor unit. Clean the supply and return registers within your home, and straighten their fins if bent.

You should also have a professional technician service your heat pump at least every year. The technician can do the following:

  • Inspect ducts, filters, blower, and indoor coil for dirt and other obstructions
  • Diagnose and seal duct leakage
  • Verify adequate airflow by measurement
  • Verify correct refrigerant charge by measurement
  • Check for refrigerant leaks
  • Inspect electric terminals, and if necessary, clean and tighten connections, and apply nonconductive coating
  • Lubricate motors, and inspect belts for tightness and wear
  • Verify correct electric control, making sure that heating is locked out when the thermostat calls for cooling and vice versa
  • Verify correct thermostat operation.

U.S. Department of Energy

 
Contact Information
 
Tradesman Services, LTD
  585 E. Loop 340  •  Waco, TX 76705
  254.829.0052
  Monday - Friday  |  8:00am - 6:00pm
  LIC: TACL A4454C | TACL A26599C
For Geothermal in Woodway TX, we accept most major credit cards.
 
 
Call for reliable Furnace replacement in Waco TX.
For your Furnace repair in Waco TX, trust a NATE certified contractor.
For Geothermal replacement in Waco TX, opt for an ACCA member.
Furnace repair service in Woodway TX
Home   |   Email Us   |   Schedule Service   |   Get a Quote   |   Maintenance   |   Employment   |   Reviews   |   Search Site
Home   |   Email Us   |   Schedule Service
Get a Quote   |   Maintenance
Employment   |   Reviews   |   Search Site